How to Burn a Windows 10 ISO File to USB If you have a Windows 10 ISO file, burn it to a USB drive so that you can create a Windows 10 installation/setup USB. Some people thought burning is just copying the ISO file to a USB. Unfortunately, it’s not that simple. Actually, you can’t do that without a third-party tool.
Now here show you with the free Rufus program. How to burn a Windows 10 ISO file to USB Step 1: Download the free Rufus tool from Step 2: Double click the rufus-2.3.exe file, or rufus-2.2.exe, or some other, just depending on the version you downloaded. Then Rufus program will start.
Step 3: Insert a USB device into your computer. Step 4: Then Rufus program will recognize the inserted USB device and you can see your USB drive name showed in the drop-down button under Device.
Step 5: Just leave all the options its default state. The thing you have to do is making ISO Image selected next to Create a bootable disk using, and then clicking the CD/DVD icon.
Make bootable Windows ISO from installation files. NOTE: This method is applicable to Windows 10, 8.1 and 7 versions. In this guide, I will show you how you can create a bootable Windows 7/8.1/10 ISO image file from Windows installation files. Finally boot using Bootable Windows USB Pen drive. Now you have created your bootable USB pen Drive for Windows 10 using USB drive installation is the effective way to install the Windows operating system with ease. For any issues during the setup to make bootable USB drive you can use the comment section below.
Step 6: Then navigate to the path to your Windows 10 ISO file through the Open dialog. Select the target ISO file and click Open. Step 7: Now click Start and then confirm the WARNING: ALL DATA ON DEVICE ‘WILL BE DESTROYED’ dialog to start the burning of Windows 10 ISO file to the USB drive.
Note: If important data is stored on this USB drive, backup it in a safe place first before you confirm the warning dialog. Step 8: Wait patiently while the burning process is on and don’t unplug the USB drive. It depends on the Windows 10 ISO file size that how long the burning will take. Usually it takes around 10 minutes. Step 9: When the status at the bottom of the Rufus program window says DONE, you can close the program and unplug the USB drive. When you complete burning a Windows 10 ISO image file to a USB drive, you get a Windows 10 installation USB. And the, which include Windows 10 installation, system repair, or password reset.
Conclusion: An ISO file including a Windows 10 ISO file is actually a copy of an entire data CD/DVD. You have to burn it to a USB or CD/DVD flash drive before you can use it. And it requires you to use a third-party burning tool like Rufus or some other to perform burning.
CDs and DVDs as operating system installation media are pretty obsolete now. On the other hand a bootable USB is quite versatile, and much more easier to carry too. So, here's how to create windows 10 bootable usb from ISO files, instead of burning it to a DVD. Currently most modern PCs have UEFI boot firmware, and also a legacy BIOS compatibility mode.
So the first thing you've to decide that how you want to install and use Windows. But that's up to your choice, here we'll create the windows 10 bootable USB with both support, and of course in 4 different ways. Assuming you've already downloaded the ISO file, if not, get it from. Contents. Windows 10 ISO to USB It's the easiest option if you want to boot windows 10 in only UEFI mode. First mount the Windows 10 ISO file by right clicking over it. Plug in a USB drive to your PC, capacity of 8 GB or more.
Format the USB drive to FAT32 filesystem. Copy all the contents from the mounted ISO file to the USB drive. When copying is finished, Eject the pendrive from system tray, and you're ready to go.
Note: The direct mount feature is available only if you're using Windows 8 and above. If not, you've to use some other software like. Though not necessary, I've added the extra Eject step to ensure all the data is properly copied to the USB drive. Actually this method works perfectly, without help of any third party software. As the USB drive is formatted to FAT32, it also acts as the EFI System Partition, so it can boot in UEFI mode.
And all the UEFI boot related files are present inside the Windows 10 ISO file. Also thankfully the install.wim file is still under 4 GB, so it can fit inside a FAT32 partition. Enjoy free shipping and One-Day delivery, cancel any time. The two drawback of this method is, there's no legacy BIOS boot support and it's pretty impractical to format USB flash drives to FAT32, specially if it's 16 GB or more. Using the Rufus application is one of the all rounder boot USB maker tool for for Windows.
![How How](/uploads/1/2/4/3/124329237/775077701.png)
![Create Create](/uploads/1/2/4/3/124329237/988742520.png)
It can make from almost any OS installation ISO file, including Linux. Actually using this software is damn simple, we just have to select few options and choose the proper ISO file, and that's all.
To create windows 10 bootable USB with Rufus, follow the steps below. Run the Rufus application by double clicking over it, and hit Yes. Select the proper USB drive, and make sure there's nothing important left inside. Now choose the partition scheme, it should be MBR partition scheme for BIOS or UEFI. Then select NTFS as desired File System. Select the Windows 10 ISO file by clicking the icon next to ISO Image option.
Hit the Start button to begin the process. It should take 5 to 10 minute to complete the process, mostly depending upon the write speed of your USB flash drive. So, what's the advantage Rufus to create windows 10 bootable pendrive? Well, you can use this USB drive to boot on both UEFI and legacy BIOS systems.
And also with Rufus you can keep your drive NTFS formatted, which in my opinion better than FAT32. But how can a USB boot on a UEFI system from a NTFS partition? Well, here Rufus creates two partition, the main partition covering almost all of the drive space, formatted as NTFS. And another 256 KB FAT32(possibly FAT16) partition, containing the UEFI binaries and the drivers.
Create Windows 10 bootable USB with Universal USB Installer The Universal USB Installer or UUI is an open source application for Windows to create of various distributions. But it's not limited to Linux/UNIX distros only, it can also create windows 10 install USB.
So, here's the steps below to create a windows 10 bootable USB with UUI. First you need to download the UUI application, follow the link above. Double click on the Universal USB Installer application to run it.
At step 1, select the Windows 10 Installer from the drop down menu. Next select the Windows 10 ISO file by clicking the Browse button. On step 3, select the USB drive you want to use, it's D: in my system. Also check the FAT32 Format Drive check box, we need to format it. Finally hit the Create button, the application should start creating the bootable usb windows 10. It will take some time to extract and copy the contents of the ISO file. So, what UUI exactly do to make the USB bootable?
Well, a lot of things, but first of all it formats the USB flash drive. Then installs the syslinux bootloader and copies relevant files, like ldlinux.sys, menu.c32, chain.c32, and also marks it as bootable. Then creates the directory uui and a configuration file syslinux.cfg.
After that it extracts the contents of the windows 10 ISO file with 7zip and copies it to the pendrive. As the drive is formatted to FAT32, it's also capable of booting in pure UEFI mode, as explained in our first method.
But on when the USB is booted off on a legacy BIOS system, it's booted via the syslinux bootloader, which chain loads the bootmgr binary. Using the UUByte ISO editor is a multipurpose ISO file editor, creator and extractor tool, which could also be used to burn DVDs and create bootable USB from Windows 10 OS installer ISO files. Of course first you've to download and install the software, here's the. Installation is very easy, you just need to double click over the downloaded exe file. Thenn launch the UUbyte software, and select the Burn option.
From the burn option, choose the ISO image you want to use, in this case it's the Windows 10 ISO file. The next option is to choose the USB drive you want to use, in this case it's E:, be very careful at this step, as choosing the wrong partition/drive will cause data loss. Next select the Partition type, use the GPT partition scheme if you want to boot windows 10 in UEFI only mode. Note that if you're using the GPT partition, then you've to use the FAT32 filesystem on the USB drive, but with MBR mode, you can even format the drive to NTFS, which is bit more convenient. Volume labeling is optional, choose anything you want or leave it blank.
Finally hit the Burn button, your windows 10 bootable USB will be ready within few minute. The sped of the process depends mostly on the speed of the USB drive you're using and the size of the USB drive. Conclusion Last but not least, there's the official tool, Windows Media Creation Tool from Microsoft to create windows 10 bootable USB.
However I don't like that tool much, it's literally complication of a simple task. You can download the Windows Media Creation Tool visit. And look for the Download Tool Now button. Anyway if you want to use it, then make sure you have a stable and fast enough internet connection to download around 4.4 GB of data within a reasonable time. What if you're on Linux and need to do the task?
Check here how to. I hope these methods explained above are enough to create your windows boot or recovery USB drive. If you've any question, suggestion or you use any different tool, please let me know through the comments. Filed Under: Tagged With.